Rhino Fire Wiring Upgrade Kit
A full, high current wiring loom for your Nerf Elite Rhino Fire. Eliminate parasitic resistance and raise the range and rate of fire of the heaviest blaster in your arsenal. Throw in the right battery pack (see below) for instant trigger response, too.
Note: This kit is intended for advanced electrical modders only, please refer to the wiring diagram for assembly. There is no fitting guide.
All the necessary MOSFETs, relays and Diodes necessary to wire up the switches
A high current braking microswitch
A choice of high current battery connector
Batteries and Voltage Monitoring:
This kit is not supplied with an appropriate battery pack, battery charger or voltage monitoring system - these must be bought from outside retailers. This kit is recommended for a 12V build so a 3S LiPo is the optimum solution. If using Blades or other 2S motors, diodes are recommended to step down the voltage to the necessary levels.
3S Solution Battery | Alarm system
Recommended battery charger:
The IMAX B6 is our recommended battery charger, buy it once and you'll be able to charge all our recommended batteries, car batteries, household rechargeables and more!. Purchased from an external retailer, the links can be found here: Charger & Power Supply
NOTE: All blasters are modified at your own risk. Modified dart blasters are not toys and upgrades should not be purchased by those under the age of 16. Blastersmiths UK Ltd does not accept any liability for damage or reduction in lifespan of your blaster. Blastersmiths UK Ltd also does not accept liability for any injury caused during or after modifying your Nerf blaster. It is the end user's responsibility to use a modified blaster appropriately and safely - eye protection is strongly recommended when using any modified blaster. Purchase and use of one of these items is taken as acceptance of these terms.