Rapidstrike Wiring and Switch Upgrade Kit
  • Rs_wiring_kit
  • Rapidstrike_switch_wiring_upgrade_kit
Manufacturer Blastersmiths UK Ltd
Blaster Compatiblity Rapidstrike CS-18
After Market Motor Compatibility MTB Rhino & MTB Honey Badger

Rapidstrike Wiring and Switch Upgrade Kit

A complete wiring harness and switch upgrade kit including Blastersmiths UK's own switch plate upgrade, all the 18AWG wire you'll ever need and the switches and battery connectors to go with it. Install this kit to remove parasitic resistance and improve flywheel response time. Back it with a decent battery (see below) and you'll truly unlock the power of your Rapidstrike. This kit is designed for stock motors and MTB Rhino flywheel motors on 3S LiPo with either stock, MTB Rhino or MTB Honey Badger pusher motors. If you're looking for a MTB Hellcat compatible kit, see our high powered variant.

The kit includes (for 1 RS build):
Rapidstrike switch support plate in 3D printed PLA
All the necessary lengths of high grade silicone coated 18AWG hobby wire
High current battery connector of your choice
All necessary high current micro switches

Additional Information

Fitting guide
Wiring Diagram
Fitting Videos from Foam Data Services: Pt1 | Pt2 | Pt3

Lead times: This product is produced in house to order and as such takes a little time to make. We do keep a small stock of pre-cut kits but during peak times it might take a couple of days to catch up. Full details can be found here. Full details can be found here.

Batteries and Motor Combinations:
Suitable battery and motor combinations can be found in this chart here.

Recommended battery charger:
The IMAX B6 is our recommended battery charger, buy it once and you'll be able to charge all our recommended batteries, car batteries, household rechargeables and more!. Purchased from an external retailer, the links can be found here: Charger & Power Supply

NOTE: All blasters are modified at your own risk. Modified dart blasters are not toys and upgrades should not be purchased by those under the age of 16. Blastersmiths UK Ltd does not accept any liability for damage or reduction in lifespan of your blaster. Blastersmiths UK Ltd also does not accept liability for any injury caused during or after modifying your Nerf blaster. It is the end user's responsibility to use a modified blaster appropriately and safely - eye protection is strongly recommended when using any modified blaster. Purchase and use of one of these items is taken as acceptance of these terms.


Battery Connector
£18.00 GBP